Things to Keep in Mind When it Comes to Car Engine Oil

Any sensible car owner knows that cars have certain issues which are not understandable to a layman. Take car engine oil, for example. There are three distinct scenarios that you can face: low engine oil, high or low oil viscosity, or a worn out engine.

It’s better if you take your vehicle to a professional, for example, MG Autos for oil pressure checks and refills, tyre repairs, and, if needed, clutch replacement in Ripley.

Now, coming back to oil pressure, let’s see those possible issues that may lead to low oil pressure and engine malfunctions.

1. Your engine doesn’t have enough oil

Oil is often disproportionately consumed due to several reasons – evaporation leaks through oil plugs and seals, worn-out piston rings, etc. Even though you check and recharge lubricants sufficiently, the engine may lose oil as a result of such factors.

Additionally, the consumption increases with an increase in the engine’s age. Thus, checking it every once a while and recharging it is the best solution to have a properly functioning engine.

However, if vehicle owners spot leakages from the exterior of the engine, it calls for emergency attention. Professional service is mandatory.

2. Oil viscosity is either too low or too high

Oil viscosity is essential as sufficient pressure ensures optimum fuel consumption and better vehicular performance. Too high or too low viscosity means there’s a loss in pressure due to low oil levels.

High viscosity may generate greater flow resistance of the oil which makes it harder for the pump to flow the oil into the engine. It may lead to a dearth of friction and ultimately lower oil pressure across the system. It happens in cold weather. To avoid such situations, car owners must use the right kind of lubricant.

Conversely, low viscosity signifies less resistance which ultimately translates to lower pressure. It occurs as a result of selecting a lubricant with the incorrect viscosity. The same thing happens when the cooling system is malfunctioning, or the car gets heated up as a result of overloading. So, keep in mind the importance of oil viscosity while doing an Oil Change.

3. Worn out engine

First, see if your engine’s oil level mark is between ‘full’ and ‘add’ on the regular dipstick. If it is, then your vehicle’s cause of low oil pressure could be wear of engine bearings. Too much pressure and excessive wear of engine reduce the actual flow leading to a drop in oil pressure. Seek professional help to avoid such flaws. Running your engine on low oil will cause irreparable damage to the engine and require a substantial amount of repair later.

Remember: engine oil works as a lubricant

Since oil deficiency can lead to unwanted contact of metals along with mechanical failure, it is essential at all times to keep vigilance on it with these easy measures. It will lead to an expansion in the lifespan of your engine in the long run and reduce repair cost. Adopting these economical tips will help you!